The Luxin manual internal blind with guides is the maximum in comfort combined with aesthetics.Through the handle bar and the clutch mechanism, the blind can be stopped at will where you want to create the right atmosphere. The blind with blackout fabric does not allow light to enter, completely blacking out the environment. The exterior of the blackout fabric is reflective and the interior coloured thus furnishing your home. With the Luxin blackout blind, you can sleep sweet dreams. The Luxin blind with filter fabric is ideal for those who live the room with light during the daytime.The filter fabric is a technical fabric that allows light to enter and spread, creating shade.

The filter fabric is ideal for studies and bathrooms where it is not necessary to have total darkness.

The guides of the structure can be silver or white and, combined with the desired colour of the fabric, furnish and add colour to the environment.



blackout symbol

Blackout fabric for ensuring total darkness inside the room.

The inner part is coloured thus furnishing the room, while the outer part has a reflective film which does not allow light to pass thus obtaining total darkness.

filter symbol

Filter fabric for ensuring half-light and filtering of light inside the room. The inner and outer parts are coloured, furnishing the room and allowing light to pass partially thus obtaining an ideal filtering for living the interior environment.


There are 9 colours of blackout fabric available for manual internal blinds.

The CREAM and WHITE colours are standard while the other special colours are available on request.

blackout fabric colours

There are 7 colours of FILTER fabric available for manual internal blinds.

The CREAM and WHITE colours are standard while the other special colours are available on request.

filter fabric colour



The manual internal blind is equipped with an aluminium structure with roller covers and lateral guides that permit linear sliding of the fabric along its entire movement.

The standard colour of the aluminium structure of the manual blind is silver; white coloured aluminium is also available on request.


The manual internal blind can be stopped in all positions desired.

It is fitted with wires under tension concealed behind the guides which create friction that block it where you want, making it possible to graduate the light entering the home.

The blind stop wherever desired up to total closure or maximum rolling up.

When the window is positioned at a low position which is reached manually, just raise or lower the blind by means of the handle bar located at the end of the fabric.


If it is impossible to reach manually, a pin can be inserted in the handle bar and the blind manoeuvred using a specific remote pole with eyelet.


(Sizes base x height x width)

internal blind measurements

Manual internal blinds should be placed and installed in the glass compartment of the window.

To order blinds, it is necessary to refer to the size of the window (e.g. 78x98) and the model (e.g. mod. C), then Luxin will supply the appropriate blind with precise measurements of the glass compartment on the interior of the sash (e.g. 61.8 x 81.8).

This type of blind is made to measure; just inform Luxin of the measurements of the glass compartment (B base x H height x W width), taking into account that the minimum width required for the roller housing is 4 cm.

made to measure



Manual internal blinds can be pre-installed in-house and arrive already inserted inside the window.

In the event that you wish to instal the manual blind after installation of the window, this is possible by consulting the installation instructions which can be downloaded from the site; it is a simple operation that is easy to perform.

Manual internal blinds that stop in all positions can be installed in and are compatible with window models:

B - C - BC - XL - SFERA

Share by: